1 ? fn6508.3 isl1536 dual channel central office adsl2+ line driver the isl1536 is a very low power dual channel differential amplifier designed for central office line driving for dmt adsl2+. this device features a high drive capability of 400ma while consuming only 4ma of supply current per amplifier from 12v supplies. it integrates gain and bias resistors while maintaining high slew rate and low distortion. features ? internal fixed gain a v = 12.85 ? integrated feedback resistors ?43.4v p-p differential output drive into 100 ?41.6v p-p minimum differential output drive into 60 ? -59dbc typical driver output distortion driving 50 at 2mhz ? low quiescent current of 3ma per amplifier ? power-down disable control ? pb-free (rohs compliant) applications ? adsl, adsl2, adsl2+ line drivers ? g.shdsl, hdsl2 line drivers ? video distribution amplifiers ? video twisted-pair line drivers pinout isl1536 (16 ld 4x4 qfn) top view ordering information part number (note) part marking temp. range (c) package (pb-free) pkg. dwg. # isl1536irz 153 6irz -40 to +85 16 ld qfn l16.4x4e ISL1536IRZ-T13* 153 6irz -40 to +85 16 ld qfn l16.4x4e *please refer to tb347 for detai ls on reel specifications. note: these intersil pb-free pl astic packaged products employ special pb-free material sets, molding compounds/die attach materials, and 100% matte tin plate plus anneal (e3 termination finish, which is rohs compliant and compatible with both snpb and pb-free soldering operations). intersil pb-free products are msl classified at pb-free peak reflow temperatures that meet or exceed the pb-free requirements of ipc/jedec j std-020. get full datasheet *gnd for both single/dual supply ina inb gnd inc ind vbcd discd vs- vbab disab vs+ outa outb nc outc outd 1 2 3 4 12 11 10 9 5 6 7 8 16 15 14 13 thermal pad* data sheet caution: these devices are sensitive to electrosta tic discharge; follow proper ic handling procedures. 1-888-intersil or1-888-468-3774 | intersil (and design) is a registered trademark of intersil americas inc. copyright ? intersil americas inc. 2008, 2009, 2010. all rights reserved. all other trademarks mentioned are the property of their respective owners. march 8, 2010
2 all intersil u.s. products are manufactured, asse mbled and tested utilizing iso9000 quality systems. intersil corporation?s quality certifications ca n be viewed at www.intersil.com/design/quality intersil products are sold by description only. intersil corpor ation reserves the right to make changes in circuit design, soft ware and/or specifications at any time without notice. accordingly, the reader is cautioned to verify that data sheets are current before placing orders. information furnishe d by intersil is believed to be accurate and reliable. however, no responsibility is assumed by intersil or its subsidiaries for its use; nor for any infringements of paten ts or other rights of third parties which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of intersil or its subsidiari es. for information regarding intersil corporation and its products, see www.intersil.com fn6508.3 march 8, 2010 isl1536
|
